WIN-911 is unable to browse for iFIX Blocks

Mehtab

Member
Join Date
Dec 2017
Location
Houston
Posts
2
Hello,

I'm configuring win-911 alarming with Ifix 5.8. during configuration it shows error WIN-911 is unable to browse for iFIX Blocks in WIN-911's import section.

I need to install iFix patches.

1. iFIX58_EDA_001
2. iFIX58_Alarming_004

is anybody have these files kindly share with me
 
Typically you need a support contract with GE to get access to these.

I would contact your local distributor. Is the site under contract?
 

Similar Topics

I just installed a distributed Win911 system replacing a cheap small system I built using Ignition and Twilio. that worked great for the last...
Replies
2
Views
991
My customer wants me to add some analog IO to their existing PLC and create new Win 911 alarms when these analog signals are out of range. The...
Replies
2
Views
786
Is there any way to change the alarm priority after having already defined a digital alarm? Accidentally created some alarms with high priority...
Replies
2
Views
1,471
Recently started happening that when opening WIN-911 v4 Workspace in Internet Explorer (IE) the shows the WIN-911 loading screen, then when its...
Replies
1
Views
1,107
I have been using WIN-911 Alarm Notification software for years with SCADA systems such as Wonderware and FactoryTalk. WIN-911 revamped their...
Replies
15
Views
5,617
Back
Top Bottom