kecribb
Member
I have powerflex 40P drives that fault out with Fault 13. I can disconnect the load and the motor will work fine. As soon as I reconnect the belt I get the fault. I ahve also connected another motor to the same drive and it faults out also. I have followed all the recommendations on checking the motor and everything checks out. I replaced the drive and everything is working fine. I sent the drive that is faulting out to a repair facility and they cannot duplicate the fault on a bench test they say it is working fine but when it comes back I get the same problem. I have had the same fault on multiple drives in different locations and the only solution we have found is to change the drives. Does anyone have any advice as to what I should tell the repair facility is wrong?