Alarm/Horn Combination Unit - IP67

rajy2r · Dec 13, 2017

I am looking for an Alarm/Horn Combination unit that will work in a steam environment (i suppose IP67 rated). Has anyone used something like this before.

Typically the issue with a combo unit is the holes for the horn let steam in and then it starts to rust.

I found the unit below, that should work i suppose, but hoping for something prettier.

http://www.e2s.com/system/1/product/pdf/13258/mca112-l1-alarm-sounder-led-beacon-datasheet.pdf

Would appreciate the help.

jraef · Dec 13, 2017

A-B Bul. 855 signal towers and horns are available in several styles as NEMA 4X.

NetNathan · Dec 13, 2017

Check Patlite..
http://www.patlite.com/product/category6.html

mendonsy · Dec 13, 2017

Edwards Signaling has a large range of products that will probably work.

ianingram · Dec 14, 2017

I like Banner Engineering units myself..

https://www.bannerengineering.com/u...wer-lights/50mm-tower-lights-tl50-series.html

keithkyll · Dec 14, 2017

Signaworks.
Federal Signal. The IP54 is related to base. It's better if base is sealed. Electronics module is potted.

Haven't tried the Klaxon yet.

Mara · Dec 14, 2017

Werma

https://www.werma.com/en/

rajy2r · Dec 14, 2017

Thanks for the Info Guys. Most of the stuff is IP65/66 which doesn't seem to work in a steam environment. I have tried the Federal Signal SL600 and they don't last.

So far i have only found the Banner KL50, which is 50MM and is IP67 with the sealed light and horn, but i am hoping i can find something a little bigger for visibility purpose as this is for an outside application and not for a conveyor application.

alive15 · Dec 14, 2017

I would recommend Banner as well; if they can survive our dirty coolant-filled moisty air, they can most likely survive your steam.

Alarm/Horn Combination Unit - IP67

rajy2r

Member

jraef

Member

NetNathan

Lifetime Supporting Member

mendonsy

Member

ianingram

Lifetime Supporting Member

keithkyll

Member

Mara

Member

rajy2r

Member

alive15

Member

Similar Topics