Alarm/Horn Combination Unit - IP67

rajy2r

Member
Join Date
Nov 2006
Location
Canada
Posts
167
I am looking for an Alarm/Horn Combination unit that will work in a steam environment (i suppose IP67 rated). Has anyone used something like this before.

Typically the issue with a combo unit is the holes for the horn let steam in and then it starts to rust.

I found the unit below, that should work i suppose, but hoping for something prettier.

http://www.e2s.com/system/1/product/pdf/13258/mca112-l1-alarm-sounder-led-beacon-datasheet.pdf

Would appreciate the help.
 
Thanks for the Info Guys. Most of the stuff is IP65/66 which doesn't seem to work in a steam environment. I have tried the Federal Signal SL600 and they don't last.

So far i have only found the Banner KL50, which is 50MM and is IP67 with the sealed light and horn, but i am hoping i can find something a little bigger for visibility purpose as this is for an outside application and not for a conveyor application.
 

Similar Topics

Hello All, Can anyone recommend a panel mounted Alarm Sounder that is not annoying? I am not having much luck asking the Google Machine, so I...
Replies
9
Views
2,147
I have an application where we want to install a PV+ in a control room. My question is there a version that has an alarm horn that triggers off...
Replies
1
Views
2,398
Looking to silence an alarm from a HMI Button. Right now the HMI button command is set to Pulse the binary bit. Will the attached logic work to...
Replies
9
Views
9,428
Hello, I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Replies
0
Views
68
I am trying to enable an external alarm via computer speakers for Factory Talk Network Distributed Edition. I am using Alarm and Events setup. I...
Replies
7
Views
126
Back
Top Bottom