View Single Post
Old April 19th, 2017, 04:27 PM   #6
Aabeck
Member
United States

Aabeck is offline
 
Aabeck's Avatar
 
Join Date: Feb 2013
Location: Detroit
Posts: 1,034
To bypass the flashing function you would have to open the sealed electronics in the housing and rewire the power to the bulb direct.

This isn't feasible as trying to open the sealed portion would destroy the housing and bulb socket.

Maybe have a Bridgeport operator end-mill everything up to the terminals out of the housing and put your own bulb socket wired to the terminals
  Reply With Quote