View Single Post
Old February 12th, 2018, 10:06 AM   #7
Lifetime Supporting Member
United States

Bullzi is offline
Join Date: Jun 2012
Location: Colorado
Posts: 1,362
If you use a Click with the Ethernet Port you could use the PLC as your Modbus RTU to Modbus TCP Gateway. They have a 485 port to communicate with the Controllers and a Ethernet Port to go to a HMI or SCADA System.

It would make the set up simpler.
There is never enough money to do it right but there is always enough money to do it again.
  Reply With Quote