Hi Guys, I need some help here.
I have an ME project where a "Go To Display" button on my "Log In" display will only work once, after first start-up.
This is doing my head in, there should be no reason why it does not work.
I have put the APA file on dropbox for your comments.
There are 3 log-ins, "operator", "controller", and "maintenance", none of which require a password.
user "operator" has access code A only
user "controller" has access codes A & B
user "maintenance" has access codes A & B & C
The button "Point Control System" is a Go To Display "Opening Main" button, and it has visibility if CurrentUserHasCode( A ), but it will only work once. After a log out, and/or a log-in of another, or the same user, it does not open the "Opening Main" display again.
I cannot see how or why this doesn't work, so any comments would be much appreciated.
I have an ME project where a "Go To Display" button on my "Log In" display will only work once, after first start-up.
This is doing my head in, there should be no reason why it does not work.
I have put the APA file on dropbox for your comments.
There are 3 log-ins, "operator", "controller", and "maintenance", none of which require a password.
user "operator" has access code A only
user "controller" has access codes A & B
user "maintenance" has access codes A & B & C
The button "Point Control System" is a Go To Display "Opening Main" button, and it has visibility if CurrentUserHasCode( A ), but it will only work once. After a log out, and/or a log-in of another, or the same user, it does not open the "Opening Main" display again.
I cannot see how or why this doesn't work, so any comments would be much appreciated.