I have a micrologix 1100 hooked to a weintek HMI.
I copied a program from working 1100 and loaded the program into a second 1100. When I connect the PLC to the HMI and my laptop and run it live, the inputs on the ladder logic highlight but there seems to be no response in the outputs (they do not highlight). Has anyone ran into this before? Am I missing something obvious?
Thanks!
I copied a program from working 1100 and loaded the program into a second 1100. When I connect the PLC to the HMI and my laptop and run it live, the inputs on the ladder logic highlight but there seems to be no response in the outputs (they do not highlight). Has anyone ran into this before? Am I missing something obvious?
Thanks!