Don't do much hmi work and what little I do, I use Weintek's and Easybuilder Pro.
I gave an old hmi to a mates son, and told him, I would help him learn and then today, when he asked for my help, I was a bit stumped. I had showed him, the normal 2 state buttons etc, but he asked where could he get an actual roller door moving. i.e when he presses "up" the door goes up, when he presses down the door goes down. I tried to fob him off with just two state motor rotaings from the stock software, but he is having none of it, so I said I would look. I have only ever used the stock two state images in Easybuilder pro, and figured I could google and find one, but alas not as easy as I thought.
Found something like this,
except it would need to be split in two
So got me thinking, is there an online resource, software or whatever for creating two state images eg led floodlight on and off. I know one could search for a light on image then eventually find a similar light off image, but any better way.
I gave an old hmi to a mates son, and told him, I would help him learn and then today, when he asked for my help, I was a bit stumped. I had showed him, the normal 2 state buttons etc, but he asked where could he get an actual roller door moving. i.e when he presses "up" the door goes up, when he presses down the door goes down. I tried to fob him off with just two state motor rotaings from the stock software, but he is having none of it, so I said I would look. I have only ever used the stock two state images in Easybuilder pro, and figured I could google and find one, but alas not as easy as I thought.
Found something like this,
except it would need to be split in two
So got me thinking, is there an online resource, software or whatever for creating two state images eg led floodlight on and off. I know one could search for a light on image then eventually find a similar light off image, but any better way.