View Single Post
Old January 3rd, 2018, 04:19 PM   #9
Lifetime Supporting Member
United States

NetNathan is offline
Join Date: Nov 2011
Location: Corona, CA
Posts: 1,520
Originally Posted by jraef View Post
The only people who regularly use SF are OEMs who want to avoid the cost of a larger motor, knowing that the smaller one run into its SF will out last the warranty, which is all they care about. That decision by the way is at the EXPENSE of that future unexpected down time suffered by the end user.
Please understand this is NOT why we buy our motors this way and our motor are made to run for extended periods of time at 1.25 SF.

The customer wants to fastest cooling they can get on some parts, but a lot of other parts do not require that fast of cooling time.
Because it is a cooling fan motor, the hotter the cooling gas is the less load on the fan blade, but as furnace cools, the load increases, this is where we go into SF.
****Control Freak****
Net is where I be and Nathan is me.

Last edited by NetNathan; January 3rd, 2018 at 04:35 PM.
  Reply With Quote