Mitsubishi updates

Tomtom79

Member
Join Date
Feb 2022
Location
Scania
Posts
7
I use iQ works and RT toolbox and have licenses for both. I usually go to mitsubishi's site to download latest versions. First question when contacting their support is always "do you use the latest version of GX works3"?

BUT, now I dont see updates here anymore. Any tips on where to find them? Maybe it's just me but I find their site very confusing.
 
I know recently they changed their websites so if you were a member then you have to log in & change your information, however, when I tried this I never received the activation link, tried again a few days ago still no link, not had time to pursue the issue.
 
Checked my MyMitsubishi now and had a check box to mark and accept new terms. After a few clicks and reloads the page was exchanged and now this info is displayed:

MyMitsubishi

The Software download area is currently unavailable. In the future, you will find it in a different place. In the meantime, please contact your local sales or support teams. Thank you for your understanding.


So, just have to wait until they get the new download page working.

Thanks for now!
 
Which piece of software do you need concretely? Maybe I can get it from the Japanese side and I would PM you with an FTP link with this information.
 
No specific. I just usually check for updates on PLC and CAD software when I have a slower week. Better to do upgrades when I have some time to check that all is well than when we have an urgent fault.

Have happened more than once that when I try to do something, I have to start with a program upgrade to be able to continue with some firmware upgrade or so. So I try to keep programs up to date.

So no worries, just need to wait until Mitsubishi get things going again. Thanks anyway!
 

Similar Topics

I'm been deciphering a program for a press here. I've gotten most of it deciphered using the manual to understand the instructions (first mitsu...
Replies
11
Views
87
hi all i am new here i have a mitsubishi smart touch hmi i.e ms-60t-pe but i cannot find a software to edit and download a program in it any help...
Replies
3
Views
100
I have Toyopuc PLC PC10G-CPU and some communication modules of it. With this modules I'm able to connect with Ethernet, Ethernet/IP, FLnet, FRMT...
Replies
0
Views
58
In this sample programming, what does U4 mean? Any assistance would be greatly appreciated.
Replies
8
Views
176
Hi, I have a project with a R04CPU, RD77GF16 and a RJ71PN92 modules. The cell is given to me to change the program since the previous integrator...
Replies
2
Views
93
Back
Top Bottom