LG Master K Distributor info ? - PLCS.net

wrapitpkg · September 3rd, 2008, 01:00 AM

I have packaging machines that use the LG Master K 120S PLC.
I am new to PLC programming, but need to find out where some support is for these small plc's if possible.
I am wanting to get the programming program as well as the communications cable for my laptop, so I can do more than just service the electro-mechanical aspects of them.
Can anyone tell me where a distributor for these units can be contacted ...
I appreciate yoiur assistance.
Mike

mohamedzobaa · September 3rd, 2008, 01:35 AM

you can make the cable 2-3 , 3-2 , 5-5
and download the software from
http://www.cerusindustrial.com/dealertools.asp

wrapitpkg · September 3rd, 2008, 01:43 AM

Thank you for your post.

I just need to know which software to download since there are a few...so if you can tell me which one I would appreciate it.
I saw the manual was there for downloading too.
Thanks,
Mike

bkottaras · September 3rd, 2008, 01:56 AM

I believe you will need GLOFA
Check with LG industrial web site.
Use google.
Make sure the GLOFA is compatible, I'm going from memory here.
Used it once for a test, never actually used for a real life application.
It was free at the time (the software) not usre if it is nowadays.
Hope this helps

wrapitpkg · September 3rd, 2008, 02:03 AM

Thank you for your post.

I gambled before your last post and downloaded the KG Win 365 program instead, and it was the LG program. I downloaded the program file from the manufacturer and it loaded into it and works.
Thanks to everyone that assisted me, I appreciate your help.
MIke

September 3rd, 2008, 01:00 AM	#1
wrapitpkg Member Join Date: Sep 2008 Location: Auburn Posts: 8	LG Master K Distributor info ? I have packaging machines that use the LG Master K 120S PLC. I am new to PLC programming, but need to find out where some support is for these small plc's if possible. I am wanting to get the programming program as well as the communications cable for my laptop, so I can do more than just service the electro-mechanical aspects of them. Can anyone tell me where a distributor for these units can be contacted ... I appreciate yoiur assistance. Mike

September 3rd, 2008, 01:35 AM	#2
mohamedzobaa Member Join Date: May 2008 Location: Cairo-Egypt Posts: 73	you can make the cable 2-3 , 3-2 , 5-5 and download the software from http://www.cerusindustrial.com/dealertools.asp __________________ Mohamed Faheem Zobaa Electronic Devices Maintenance General Manager (+201005615261) Mohamed_f_zobaa@yahoo.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
SLC Master Controller PID	plcnovel	LIVE PLC Questions And Answers	8	July 20th, 2009 12:14 PM
LG Master K password problem	scatter17	LIVE PLC Questions And Answers	0	March 4th, 2008 08:37 PM
Why Master CPU's all LEDs of S7-414H were flashing?	arocon	LIVE PLC Questions And Answers	1	September 5th, 2007 07:25 AM
Master Slave	al_d	LIVE PLC Questions And Answers	32	July 4th, 2006 07:42 AM
Setpoint Adjustment in RTU's	Jim Knee	LIVE PLC Questions And Answers	8	March 20th, 2006 03:37 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

September 3rd, 2008, 01:43 AM	#3
wrapitpkg Member Join Date: Sep 2008 Location: Auburn Posts: 8	Thank you for your post. I just need to know which software to download since there are a few...so if you can tell me which one I would appreciate it. I saw the manual was there for downloading too. Thanks, Mike

September 3rd, 2008, 01:56 AM	#4
bkottaras Member Join Date: Oct 2005 Location: Chicago Posts: 1,366	I believe you will need GLOFA Check with LG industrial web site. Use google. Make sure the GLOFA is compatible, I'm going from memory here. Used it once for a test, never actually used for a real life application. It was free at the time (the software) not usre if it is nowadays. Hope this helps

September 3rd, 2008, 02:03 AM	#5
wrapitpkg Member Join Date: Sep 2008 Location: Auburn Posts: 8	Thank you for your post. I gambled before your last post and downloaded the KG Win 365 program instead, and it was the LG program. I downloaded the program file from the manufacturer and it loaded into it and works. Thanks to everyone that assisted me, I appreciate your help. MIke

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)