CLX CPU L62 & ENBT/A Issues - PLCS.net

Azee Sibal · May 9th, 2012, 05:09 AM

Hi everyone!

We have a customer that has a system that runs with an Allen-Bradley ControlLogix L62 with a Wonderware SCADA system. At one time their process completely stopped, and I discovered that the program was erased from the CPU, and that one of its ethernet module displays status "STOP OS". I re-downloaded the program, and the system was restored, but only to find out that the problem re-occurred the next day. This time, the same ethernet module also was affected, this time it had no display. We replaced the chassis, and then the problem didn't re-occur. I tested the suspected ethernet module on a test system, and it works fine. Is it safe to say that the culprit is the chassis?

Does anybody know where I can get hold of manuals that contain explanations on the status displays of the ethernet module. I can't seem to find them on the manuals available on the Allen Bradley site.

Many thanks!

May 9th, 2012, 05:09 AM	#1
Azee Sibal Member Join Date: May 2012 Location: Quezon City Posts: 1	CLX CPU L62 & ENBT/A Issues Hi everyone! We have a customer that has a system that runs with an Allen-Bradley ControlLogix L62 with a Wonderware SCADA system. At one time their process completely stopped, and I discovered that the program was erased from the CPU, and that one of its ethernet module displays status "STOP OS". I re-downloaded the program, and the system was restored, but only to find out that the problem re-occurred the next day. This time, the same ethernet module also was affected, this time it had no display. We replaced the chassis, and then the problem didn't re-occur. I tested the suspected ethernet module on a test system, and it works fine. Is it safe to say that the culprit is the chassis? Does anybody know where I can get hold of manuals that contain explanations on the status displays of the ethernet module. I can't seem to find them on the manuals available on the Allen Bradley site. Many thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
AD 250-1 CPU How can I reset-erase this CPU so I can use it with a NEW program withou	Anibal Hernandez	LIVE PLC Questions And Answers	16	March 22nd, 2011 07:21 AM
Can we use CLX CPU with PLC-5 I/O Modules?	ckchew666	LIVE PLC Questions And Answers	5	February 23rd, 2005 12:36 AM
Dual CLX CPU in a Redundant chassis?	ckchew666	LIVE PLC Questions And Answers	6	November 25th, 2004 08:13 PM
Funny effects when uploading project to S7 300 CPU	RMA	LIVE PLC Questions And Answers	9	October 28th, 2004 07:44 AM
Changing from Melsec A3H CPU to A3A CPU	Ptilou	LIVE PLC Questions And Answers	3	October 2nd, 2003 05:56 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)