GML Commander - PLCS.net

AndrewY · August 11th, 2008, 10:06 PM

Hi all,

I am looking to get a copy of GML Commander (even a demo version will be fine) as we are upgrading an old IMC S with new servos but don't have the ability to view the current program in the IMC S.

Any links / downloads etc. would be much appreciated.

Thanks

Gerry · August 12th, 2008, 04:11 AM

Unless you have a copy of the .gml source file for the S-class program, GML commander won't be much help. It will only upload the i-code from the controller, which probably isn't what you're looking for.

Are you keeping the S-class? If you're upgrading the servos, it's probably a good time to upgrade the controller as well.

AndrewY · August 12th, 2008, 03:44 PM

Yea we're upgrading the controller also.

We have the *.gml source code - I just have no way of looking at it

bkottaras · August 12th, 2008, 09:05 PM

Quote:

Originally Posted by AndrewY

Yea we're upgrading the controller also.

We have the *.gml source code - I just have no way of looking at it

Your local AB rep may be able to open the file for you and give you a hard copy.
Not sure how they do business in OZ but it is very common here to do that, especially if you are upgrading to a newer AB platform hardware.
EDIT: I'm sure someone on here may be able to do that as well.

AndrewY · August 12th, 2008, 09:09 PM

of course ...
I'll speak to our rep here in NZ

thanks

jonney · June 29th, 2012, 09:59 PM

I got GML Commander V4.03. I can send you. Email me at jonney3099 at gmail.com

OkiePC · June 30th, 2012, 10:11 PM

Quote:

Originally Posted by AndrewY

Yea we're upgrading the controller also.

We have the *.gml source code - I just have no way of looking at it

I have an old machine in the closet with gml on it. I might be able to open it and make some reports if you have no luck getting a copy.

August 11th, 2008, 10:06 PM	#1
AndrewY Member Join Date: Oct 2007 Location: Auckland Posts: 13	GML Commander Hi all, I am looking to get a copy of GML Commander (even a demo version will be fine) as we are upgrading an old IMC S with new servos but don't have the ability to view the current program in the IMC S. Any links / downloads etc. would be much appreciated. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Gml commander	agiusm1	LIVE PLC Questions And Answers	3	September 6th, 2012 01:55 AM
Gml Commander	nikotx	LIVE PLC Questions And Answers	0	January 23rd, 2008 09:47 AM
Converting GML to Controllogix	Faried	LIVE PLC Questions And Answers	4	June 14th, 2007 05:00 AM
GML Commander Older Version	CONTROLTESTGUY	LIVE PLC Questions And Answers	2	January 18th, 2007 01:00 PM
A-B 1394 Servo Drives & GML Commander	Dr. Watson	LIVE PLC Questions And Answers	14	January 30th, 2006 06:20 PM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

August 12th, 2008, 04:11 AM	#2
Gerry Member Join Date: Jun 2002 Location: Auckland Posts: 1,142	Unless you have a copy of the .gml source file for the S-class program, GML commander won't be much help. It will only upload the i-code from the controller, which probably isn't what you're looking for. Are you keeping the S-class? If you're upgrading the servos, it's probably a good time to upgrade the controller as well.

August 12th, 2008, 03:44 PM	#3
AndrewY Member Join Date: Oct 2007 Location: Auckland Posts: 13	Yea we're upgrading the controller also. We have the *.gml source code - I just have no way of looking at it

August 12th, 2008, 09:09 PM	#5
AndrewY Member Join Date: Oct 2007 Location: Auckland Posts: 13	of course ... I'll speak to our rep here in NZ thanks

June 29th, 2012, 09:59 PM	#6
jonney Member Join Date: Apr 2012 Location: Malaysia Posts: 12	I got GML Commander V4.03. I can send you. Email me at jonney3099 at gmail.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)