You are not registered yet. Please click here to register!

plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!

Go Back - Interactive Q & A > - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Thread Tools Display Modes
Old December 7th, 2017, 12:44 PM   #1
United States

heliocdw is offline
Join Date: Nov 2017
Location: los angeles
Posts: 2
power flex 40p, error code F005

hello everyone, i would like to explain my problem and see if someone can help me.
we have a machine to cut wood, original the aluminium head tolling where is placed the cutters , we replace for a metal head tolling, after that when we need to stop the machine the drive power flex 40p show on the display fault F005, the manual say MONITOR THE AC LINE FOR HIGH LINE VOLTAGE OR TRANSIENT CONDITIONS, BUS OVERVOLTAGE CAN ALSO BE CAUSED BY MOTOR REGENERATION, EXTEND THE DECEL TIME OR INSTALL DYNAMIC BREAKE,i increase the decel time but still the same problem, we put it back the aluminium head tolling and the machine works good with out any problem, but when we switch to metal head is when the faul pop up,,, thank you.
  Reply With Quote
Old December 7th, 2017, 01:22 PM   #2
United States

rankhornjp is offline
Join Date: Dec 2008
Location: Georgia
Posts: 169
Any problem with letting it coast to a stop instead of ramping to a stop? If not, I would set it up to coast. It sounds like the weight difference of the metal vs aluminium is enough to cause to the motor to regen which is spiking the bus voltage.

If you can't let it coast to a stop, then you need to add an external brake to eat up the extra voltage.
  Reply With Quote
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
To Latch Or Not To Latch BOWRIDER LIVE PLC Questions And Answers 43 October 21st, 2015 05:19 AM
1794 flex analog input power supply raul111 LIVE PLC Questions And Answers 5 March 10th, 2011 03:31 PM
power flex 4 fault 042 bornwild LIVE PLC Questions And Answers 12 January 21st, 2011 07:34 AM
Power Flex 70 Drives on Device Net bmcombs LIVE PLC Questions And Answers 3 October 2nd, 2003 08:02 PM
Power Flex 4 Holeshot LIVE PLC Questions And Answers 11 May 14th, 2003 01:44 PM

All times are GMT -5. The time now is 06:50 AM.