Converting Instruction lists from 90-30 to Rx3i - PLCS.net

demond1984 · November 27th, 2017, 11:30 AM

Hi,

I'm in the process of upgrading 90-30 to Rx3i, and the 90-30 has instructions lists in the program that are not supported in the Rx3i.

Any advice on what would be the best action to convert this into ladder/structured text?

Steve Bailey · November 27th, 2017, 12:36 PM

I could be mistaken, but I was under the impression that there is 100% conversion between IL and ladder in the 90-30 and that 90-30 ladder is 100% convertible to Rx3i. Could it be that your 90-30 program is in SFC?

If you can post a backup of your 90-30 project file, I can try to help.

demond1984 · November 29th, 2017, 07:51 AM

Thanks Steve.

attached is the backup

Steve Bailey · November 29th, 2017, 05:11 PM

The Rx3i does not support IL blocks. The easiest approach is to convert the IL to LD. There was a conversion utility in Versa Pro to convert between LD and IL, but that utility doesn't exist in Machine Edition. I did quick conversion of the SP_AXIS block for you (attached). Be advised that I didn't proofread it or try to download it to a PLC. The other IL block doesn't appear to be called anywhere. At any rate, it is only two lines, so it is a simple enough conversion to LD.

demond1984 · December 11th, 2017, 02:41 PM

Steve, sorry it took a while to respond, but I really appreciate the help on this!!!!!! You were a live saver.

Steve Bailey · December 11th, 2017, 07:33 PM

You're welcome. Glad I could help.

November 27th, 2017, 11:30 AM	#1
demond1984 Member Join Date: Nov 2017 Location: TX Posts: 3	Converting Instruction lists from 90-30 to Rx3i Hi, I'm in the process of upgrading 90-30 to Rx3i, and the 90-30 has instructions lists in the program that are not supported in the Rx3i. Any advice on what would be the best action to convert this into ladder/structured text? Last edited by demond1984; November 27th, 2017 at 11:34 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
Question about OSR	Rocguy	LIVE PLC Questions And Answers	24	March 13th, 2017 05:43 PM
Variable array size call to add-on instruction - A solution	Mr Modbus	LIVE PLC Questions And Answers	4	July 17th, 2015 07:59 AM
Converting a TI505 to AB. MIRW instruction??	Psymon	LIVE PLC Questions And Answers	5	March 26th, 2011 09:37 PM
Status Point Energize (STE) – An Easier Way to Keep Track of Process Status	RichardE	LIVE PLC Questions And Answers	16	October 29th, 2010 06:52 PM
Same "ONESHOT" in Multiple Locations	skyfox	LIVE PLC Questions And Answers	21	May 28th, 2007 10:33 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

November 27th, 2017, 12:36 PM	#2
Steve Bailey Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: The boondocks of Western Massachusetts USA Posts: 6,441	I could be mistaken, but I was under the impression that there is 100% conversion between IL and ladder in the 90-30 and that 90-30 ladder is 100% convertible to Rx3i. Could it be that your 90-30 program is in SFC? If you can post a backup of your 90-30 project file, I can try to help.

December 11th, 2017, 02:41 PM	#5
demond1984 Member Join Date: Nov 2017 Location: TX Posts: 3	Steve, sorry it took a while to respond, but I really appreciate the help on this!!!!!! You were a live saver.

December 11th, 2017, 07:33 PM	#6
Steve Bailey Lifetime Supporting Member + Moderator Join Date: Apr 2002 Location: The boondocks of Western Massachusetts USA Posts: 6,441	You're welcome. Glad I could help.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)