Convert Panelbuilder dos to Panelbuilder 1400e

mulderm · Sep 15, 2006

Hello,

Who can help me to convert two old Dos Panelbuilder files (for the classis Panelview 1200) to
Panelbuilder 1400e files?
Because I wanted these old files import to RSView Me Studio and, see other topics, must using
Panelbuilder 1400e software but I have it not.

Greetings,

mulderm

rPraveenkum · Sep 15, 2006

Post the files i will try to convert it for you

mulderm · Sep 15, 2006

Here they are.

mulderm

rPraveenkum · Sep 15, 2006

Check this out this is with .PVC ext

mulderm · Sep 15, 2006

Please convert also the other file in ventpost.pvc so
I can also tried this.
Thank you,

mulderm

rPraveenkum · Sep 15, 2006

check this

mulderm · Sep 15, 2006

Thank you rPraveenkum, you are great!
I will try the files.
You will hear of me.
Many, many thanks.

mulderm

mulderm · Sep 15, 2006

Hello again rPraveenkum,

I have import the ventpost.pvc into RSView Studio.
In the Project Status dialog box I get the messages
see the attached file.
What will this say and what must I do?
I have the old Panelview 1200 running in a Remote I/O network
with the PLC5/25 processor.
Now I want to replace this with the Panelview Plus 1500.
Can I test the converted application on the Remote I/O with
my notebook with RSView Studio or are there conflicts?

Greetings,

mulderm

Convert Panelbuilder dos to Panelbuilder 1400e

mulderm

Member

rPraveenkum

Member

mulderm

Member

rPraveenkum

Member

mulderm

Member

rPraveenkum

Member

mulderm

Member

mulderm

Member

Similar Topics