Ricoswave11
Member
I have an older system and they recently replaced the VFD to a newer revision. I tried to modify the VFD in the program to the new revision but everything is grey'd out. After researching online AB knowledge base said to update the AOP and database files. I followed those instructions exactly, downloaded the new AOP and loaded, both drive tools and CCW database files and loaded. Still I can't change the revisions. I then removed RSLogix completely from the computer and reinstalled, again loaded the new AOP and database files and still I can't modify the revision.
I also tried adding a new VFD of the same type and it does not let me create it however the revision is correct.
What am I doing wrong?
I should mention:
PowerFlex 755 with embeded ethernet R14.002
RSLogix 5000 V 19/20.01
I also tried adding a new VFD of the same type and it does not let me create it however the revision is correct.
What am I doing wrong?
I should mention:
PowerFlex 755 with embeded ethernet R14.002
RSLogix 5000 V 19/20.01
Last edited: