zaniboni-RNBP
Member
I am trying to integrate a Cognex Insight Micro 1100 camera with a CompactLogix 1769-L32E PLC. I am trying to use the ethernet communication port build directly into the PLC processor. When configuring the PLC I setup a generic Ethernet module but I am getting a comunication error when I go online.
RSLinx sees the camera and regonizes the IP address - although it does say '? 192.168.0.20, unrecognized device, Insight Micro 1000 Series'. It is not X'ed out like some other things so I think it is seeing it.
Does anyone have any experience with integrating a Micro 1100 with a CompactLogix PLC? I have called Cognex but their support is less than stelar and all I could do was leave a message.
Thanks
RSLinx sees the camera and regonizes the IP address - although it does say '? 192.168.0.20, unrecognized device, Insight Micro 1000 Series'. It is not X'ed out like some other things so I think it is seeing it.
Does anyone have any experience with integrating a Micro 1100 with a CompactLogix PLC? I have called Cognex but their support is less than stelar and all I could do was leave a message.
Thanks