Machine PC that has the following come up.No DPRAM availible or Delta Tau not found

Cydog

Member
Join Date
Feb 2018
Location
Maryland
Posts
313
Good Evening ,

I have a small machine PC , that when it boots , the following message comes up at startup. Could you help me understand this .

"ERROR , No DPRAM available or Delta Tau not found .Please close down and check Delta Tau controller. "

You folks have any thoughts ?

Thanks so much for your help.
 
In this context, "DPRAM" is probably "Dual Port RAM", a straightforward way for PC programs to very quickly exchange blocks of data with a controller running on an expansion card.

Presumably, this computer has a Delta Tau motion controller card in it that has malfunctioned.
 

Similar Topics

Hello Everybody Anybody knows where I can get this version of SoMachine? The new machine expert version won't open my project saying there is a...
Replies
0
Views
34
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
99
I'm getting frustrated creating arrays of variables in Machine edition. I need to make 2 variable arrays that are 102x2 in size, with varying...
Replies
3
Views
104
Hello, I am still new to PLC programming and I just got this job two year out of school so I don’t remember much. I was given a task were I have...
Replies
1
Views
168
I am trying to connect with a Schneider plc which has a firmware version only available in Somachine v4.2. In Machine expert After taking upload...
Replies
0
Views
112
Back
Top Bottom