we have 12 numbers of power flux 40 drives in our system placed in the devicenet network. I want to connect with DSI port of power flux 40 to see the warnings of 22-COMM- D adapter. I have 1203-USB to DPI/DSI converter.
Below settings i set in RS -linx driver
Com -port-5 ( exactly ok )
Device - 1770-kf2/scan port
Baud rate - 19200. Rest all settings i leave it to default. Then i connected to drive no 1 and i take the fault messages. But when i connect to drive no2 RS linx driver not able to find the DSi .
I tried lot.
Could any one help us.
Below settings i set in RS -linx driver
Com -port-5 ( exactly ok )
Device - 1770-kf2/scan port
Baud rate - 19200. Rest all settings i leave it to default. Then i connected to drive no 1 and i take the fault messages. But when i connect to drive no2 RS linx driver not able to find the DSi .
I tried lot.
Could any one help us.