Hi all
Newbie here, hope to help if possible but first a problem of my own!
Trying to link an s5 to s7;
key points;
S5;
135u, 928B
CP524, serial module
tried ASCII, RK512, 3964(r)
Send job, Fetch job
Syncron, send-direct, recv-direct, send all, recv all.
S7
316 2-DP
CP341
tried ASCII, RK512, 3964(r)
FB7&FB8.
results:
send from S7= no error, job done, TX light on but nothing at S5!
send from S5= no error but nothing in S7
no PAFE errors, cable is ok!
anything i am missing here?
cheers
Newbie here, hope to help if possible but first a problem of my own!
Trying to link an s5 to s7;
key points;
S5;
135u, 928B
CP524, serial module
tried ASCII, RK512, 3964(r)
Send job, Fetch job
Syncron, send-direct, recv-direct, send all, recv all.
S7
316 2-DP
CP341
tried ASCII, RK512, 3964(r)
FB7&FB8.
results:
send from S7= no error, job done, TX light on but nothing at S5!
send from S5= no error but nothing in S7
no PAFE errors, cable is ok!
anything i am missing here?
cheers