Hi.
I'm dealing with configuration communication by EtherCat in Codesys.
As written in docs I've installed WinPCap, had changed CODESYSControl.cfg, loaded project with EtherCat Master and imported XML for EtherCat device plugged into RJ45 plugin. I writed MAC address for NIC for EtherCat. Nothing.
All the time I get info about "Gateway not configured properly" when I try go into the "Online config Mode...".
Please for Your help.
Mark
I'm dealing with configuration communication by EtherCat in Codesys.
As written in docs I've installed WinPCap, had changed CODESYSControl.cfg, loaded project with EtherCat Master and imported XML for EtherCat device plugged into RJ45 plugin. I writed MAC address for NIC for EtherCat. Nothing.
All the time I get info about "Gateway not configured properly" when I try go into the "Online config Mode...".
Please for Your help.
Mark