Pinout for Omron cable XW2Z-200S-CV

Does anyone have the pinout or this Omron cable?

XW2Z-200S-CV or the XW2Z-500S-CV (same cable but longer).

I need to make up a programming cable to a Omron CP1L via the CP1W-CIF01 RS-232C Option Board.

The operating manual for the CP1L specifies the XW2Z-200S-CV cable.

Why? The CP1L has a USB programming port - standard USB cable.

Here is a link to the Universal Omron Cable

Cable at Mr.PLC.com

I do have to agree with BobB. USB will be MUCH faster.

Hope this will help.

Hi, thanks for the replies.

I am already using the USB port for programming.
The reason I needed to get the serial port going was because we have another PC that needs to communicate to the PLC.

Thanks for the link, I made a cable according to that pinout and it worked.