RS232-S7-1200, NON continous data

arkngl2102

Member
Join Date
Jul 2015
Location
Mexico_City
Posts
36
Hi to all, I have a power supply "gwinstek" PSP-2010, with rs-232, so I want to control it with S7-1200 "1212acdcrly with CM-1241 RS-232 module, until now I can write with the SEND_PTO.

the command for output toggle, i just send: KO$R$L, and its working

The problem is that source not send me continuously data, i mean like a Scale weight,

the command to Power supply needs to send: volts, amp, etc, Is: L$R$L,
but I can’t read anything through RCV_PTP, requesting with a PLC clock.

The conection is good with PORT_CFG

Thanks for read me

316531247_5635421303171884_6193716447535724781_n.jpg 316293947_5635423583171656_8299624065612194983_n.jpg 316290352_5635425669838114_6462123467358570124_n.jpg 316686129_5635474439833237_3130455979141395766_n.jpg
 
UPDATE: The manufacturer of the scale indicates that the DTR must have a positive voltage, I did the test by putting voltage in the pin that told me, and I already have the data, but I suppose that the DTR must be able to be activated manually from software/instruction, I am Reading about: SGN_SET

https://support.industry.siemens.com/cs/mdm/10975986 ?C=83590094603&lc=en-ar

And with him: SGN_GET, I see that he is always in false, has anyone used these instructions?
 

Similar Topics

Hello all. I'm trying to control a heater with a S7-1200 CPU with the CM1243 communications processor. The two devices are connected with a null...
Replies
12
Views
10,050
Hi all! If I want to connect two S7-1200 CPUs with RS232 ports on both CPUs, and implement a Modbus RTU communication, what is the cable pinout...
Replies
2
Views
3,121
For a small project I need some digital I/O's and a serial communication with a weight measurement. Also an ethernet connection to an MP277...
Replies
1
Views
3,018
I am trying to communicate between a Micrologix 1200 and a vision system VB program. Current situation is that clear the buffers (ACL) and send a...
Replies
0
Views
2,588
Does anyone have the pinout for the RS232 cable used on AB panelview 1200's?
Replies
4
Views
6,893
Back
Top Bottom