Dear Friends,
Need support and contribution. I have been trying to communicate to an Omni 6000 computer using the OMNICOM software. I am using a serial to ethernet cable terminated on TB3 of the ethernet module. The IP address of the OMNI is 10.0.0.1 while that of my PC is 10.0.0.4, on same subnet mask. On pinging, it shows there is a connection between the OMNI and my PC but can't connect online through the OMNI software.
I have been trying to communicate to an Omni 6000 computer using the OMNICOM software. I am using a serial to ethernet cable terminated on TB3 of the ethernet module. The IP address of the OMNI is 10.0.0.1 while that of my PC is 10.0.0.4, on same subnet mask. On pinging, it shows there is a connection between the OMNI and my PC but can't connect online through the OMNICOM software.
Need support and contribution. I have been trying to communicate to an Omni 6000 computer using the OMNICOM software. I am using a serial to ethernet cable terminated on TB3 of the ethernet module. The IP address of the OMNI is 10.0.0.1 while that of my PC is 10.0.0.4, on same subnet mask. On pinging, it shows there is a connection between the OMNI and my PC but can't connect online through the OMNI software.
I have been trying to communicate to an Omni 6000 computer using the OMNICOM software. I am using a serial to ethernet cable terminated on TB3 of the ethernet module. The IP address of the OMNI is 10.0.0.1 while that of my PC is 10.0.0.4, on same subnet mask. On pinging, it shows there is a connection between the OMNI and my PC but can't connect online through the OMNICOM software.
