410E with TP900 different IP range
I have a PCS 7 410E REDUNDANCY CPU connected to the TP900 panel, from CPU side the X8 port address is configured as 192.168.11.25 (master) and 192.168.12.25 (slave), but the HMI port address is 192.168.11.28. the CPU address is fixed that not allowed to change, with the different IP address the TP900 only can communicate with master CPU and loose the redundancy with the slave CPU. Any chance to solve this issue
I have a PCS 7 410E REDUNDANCY CPU connected to the TP900 panel, from CPU side the X8 port address is configured as 192.168.11.25 (master) and 192.168.12.25 (slave), but the HMI port address is 192.168.11.28. the CPU address is fixed that not allowed to change, with the different IP address the TP900 only can communicate with master CPU and loose the redundancy with the slave CPU. Any chance to solve this issue