cable & software

Need a programing cable & software to program a westinghouse PLC mod PC 1100. Thanks
Regards.

See these threads, there might be of some help.
http://www.plctalk.net/qanda/showthread.php?t=45270
http://www.plctalk.net/qanda/showthread.php?t=19733

and this link:
http://pps2.com/communications/PC1200.php

See table 3-7 on page 3-59 for cable info.
http://pps2.com/communications/files/1200/sec3.pdf

That was the first PLC I learned on... Numa Logic 784 was the software (I think)

good luck, that will be hard to get

Help

geniusintraining said:

That was the first PLC I learned on... Numa Logic 784 was the software (I think)

good luck, that will be hard to get

Click to expand...

Can you help me ?
I have a problem it can not connect to a computer software plc expel me communication error when I want to load the file to the plc.
Connect your PC to the I plcom via a cable with the following connectors DB25 to DB9 to USB if this is the reason that you do not communicate or have some other problem ???
thanks for the info

t0r3r0s said:

Can you help me ?

Click to expand...

I would love too but I have drank WAY to much in the past 25 years and forgot just about everything on them.

But I did find some good info see below

http://pps2.com/smf/index.php/topic,2.0.html

http://www.pps2.com/communications/799.php

AND this is really cool

http://pps2.com/v/1/nlsw784_intro.php

Best of luck !

Most communication problems on really old plcs relate to RS232 to USB conversion devices. Also, very fast computers compared to what was originally used can cause problems as well as the operating system software. Old plcs work best with old computers with real RS232 serial ports and DOS based operating systems (Windows98 or older). The links and info GIT posted are about as good as you will find on the web.