Hi;
I had designed an HMI in RS View32 Works and an SLC-5/05 had connected with that HMI via direct driver. Now as per requirement, i need to connect a second SLC5/05 with same HMI. To configure two PLCs with an HMI, i think OPC server is used but i never configured the OPC server. Kindly help me out how to configure OPC server both in RS Linx Classic Gateway (3.51.01 CPR 9 SR 5.1) and RS View32.
I had designed an HMI in RS View32 Works and an SLC-5/05 had connected with that HMI via direct driver. Now as per requirement, i need to connect a second SLC5/05 with same HMI. To configure two PLCs with an HMI, i think OPC server is used but i never configured the OPC server. Kindly help me out how to configure OPC server both in RS Linx Classic Gateway (3.51.01 CPR 9 SR 5.1) and RS View32.