Issue of installing driver of 1784 ktcx 15

Join Date
Jan 2009
Location
Vadodara (Koyali)
Posts
41
Resp. Friends,
I have one Windows NT ver 4.0 based server and RSLinx Ver 2.30.01 and RsLinx Ver 2.20
Is there a possibility to install a 1784 KTCX 15 driver from RSLinx or it should only be installed by the driver CD Only I don't know... Please Help me...
I need a driver for it and from where I can get it?

Thanks...
Warm Regards...
 
Thank you so much Marc...
Finally I have manually configured 1784 KTCX 15 card in Windows NT Server Ver. 4.0. Now all the things are working fine...

Can we configure the 1784 KTCX 15 card in the Windows 2000 Server also??? Please advise me... If yes then how to do it?
Because I had configured it in Windows 2000 Server also but in the RSLinx, there only the KTC Card was showing in the RSWho Node view... No other devices were detected by the RSLinx... Afterall the RSLinx was already configured by the OLD Backup.

Thank You all So Much again...
With Warm Regards...
Pranav Mistry.
 

Similar Topics

Running Windows XP and RSLinx 2.51. First issue: I have installed the drivers twice now, got it working both times. For some reason the driver...
Replies
7
Views
7,142
I keep getting a fail on install: ################################ RSLogix 5000 Installation Summary Installation failed. Required components...
Replies
13
Views
8,278
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
39
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...
Replies
4
Views
145
Hi folks, in the alarm manager of Rslogix 5000, the tag-based alarm has been created. But when I tried to change the condition, it was found the...
Replies
2
Views
154
Back
Top Bottom