kittydog42
Member
I acquired (5) 6ES7-216-2AD00-0XB0, Simatic S7 216-2 PLC that I would like to program. I do have a version of Simatic S7 programming software that most likely will work; we used to use a large volume of S5's and were given software at one point by our distributor in an attempt to convert to S7, along with some demo kits. The only issue may be the age of the software or hardware as far as compatibility. Anyway, I can't find any documentation online for this model as it is discontinued. I also don't know if the old RS-232 to Current cable I used to use for the S5 will work. This PLC has two DB9 connectors on it, which is different. Thanks if you can help with the pinout or any documentation links on this PLC.