jimbo3123
Member
Does anyone know if it is possible to message directly between two Micrologix 1000 PLCs. (To share integer data)??
Each micrologix has a NET-ENI module hooking it to an ethernet network.
I am having a tough time finding information on the feasbility of doing this.
I believe it would be possible to share the information via a PC that talks to all of the processors, but I really need to message directly between processors.
There is a MSG instruction, but that seems to be geared toward DH485 (or similar) type networks.
Each micrologix has a NET-ENI module hooking it to an ethernet network.
I am having a tough time finding information on the feasbility of doing this.
I believe it would be possible to share the information via a PC that talks to all of the processors, but I really need to message directly between processors.
There is a MSG instruction, but that seems to be geared toward DH485 (or similar) type networks.