Would someone want to l00k over this weintek hmi program please

I still don't get it well on the back of this HMI it says com1 RS232 and com2 RS485 but when I pick com 2 it says that com 2 does not support the 485 why would that be.
 
I think the datasheet for the iH5 is only on the Chinese Weinview site. Check the box for the datasheet, and send picture of the connection section.
 
Last edited:
Strange: I use the MT8071iP Weinview, it shows the same on back as your screen with
COM-1 [RS232]
COM-2[RS485]
If I choose your screen in EB8000 and enter Mitsubishi FX2N it preloads the RS-485 4W
Like the connections guide asks for and the com: comes up as COM1 (19200,E,7,1)
When you go into settings there is no COM2 for RS-485-4W
My screens use EB Pro and when I enter a Mitsubishi FX2N it preloads the RS-485 4W
and the settings come up as COM2(19200,E,7,1)
 
Mine dont show a com 2 when I have the 485 picked and when I pic com 2 and try to pick 485 it says it dont support 485 on com 2
How did u get com 2 to use 485
 
Change [ Model ] to MT6070iP in EB8000 and click ok.
Go back in to edit system parameters.
You'll notice it sets RS232 to Com1, and RS485 to Com2.
Use wiring diagram in post #8.
 

Similar Topics

Does anyone know of a way to detect if someone is online with the controller in ControlLogix (from logic) I'm thinking that maybe there is a CIP...
Replies
7
Views
291
Long story short lost our parameter setup for an indradrive m. I have these files saved as backups but dont know how to open them. Can someone...
Replies
12
Views
858
If a programmable controller controls the operation of a motor, what connects motor control to the PC? A) Line voltage B) I/O device C) Modem D)...
Replies
27
Views
6,955
I can't find what laptop I have our PanelBuilder32 application and license on. And Rockwell no longer supports it. Can someone please update 1...
Replies
5
Views
1,596
I recently started getting "corrupted or low disk space" errors on all my backup panelbuilder32 files seemingly out of no where (been running ver...
Replies
2
Views
1,579
Back
Top Bottom