RSLogix 500, move project between laptops

jdbrandt

Lifetime Supporting Member
Join Date
Oct 2002
Location
Pennsylvania
Posts
1,203
Can the communications parameters in the RSLogix 500 project
files be configured to be 'off/ignored', so that opening a
project on a laptop whose comm configuration is different
does NOT result in the dreaded "Project Files Do Not Match"
message?

This is a bit of a pain, ever since V6.0 (I think), and
it seems like there ought to be a way to disable this message.

Note: The assumption is that both laptops are connecting the
same way (serial, ethernet, etc.) but the project file
is not finding the exact communications path to the processor,
because the laptops have different names, and the comm.
topics might have different names.
 

Similar Topics

Hi to everybody. I need to remove memories and rungs comment from a SLC500 program because was used as a base program a wrong file project and...
Replies
8
Views
2,350
Hey all: Is there an option in Logix 500 to copy a contact instead of move it while editing off line? When you are online, if you drag a contact...
Replies
2
Views
1,363
I'm doing a conversion from a SLC to CLX platform. When I run the SLC program through the conversion tool, it combines the address description...
Replies
2
Views
3,462
The class I am taking is currently attempting to do a stoplight program using RSLogix 500 Pro, with Allen-Bradley SLC 500 model 1747-L40B. The...
Replies
5
Views
7,952
Hello, Haven't been on in a while. I need to generate a bit level pdf of the I/O for RSLogix 500. I can generate a report but it just shows the...
Replies
1
Views
115
Back
Top Bottom