Hi , i have one task i have to stablished communication link b/w modicon & S7 300 Plc over Ethernet TCP/IP protocol. connection medium b/w them is Fiber optic i am using SCALANCE X 204-2 to convert Fiber optics in Ethernet TCP/ip protocol. can any body send me the connection diagrams
COMMUNICATION LINL B/W MODICON & S7 300 PLC
- Thread starter shabi
- Start date
Tom Jenkins
Lifetime Supporting Member
You should check with your PLC suppliers. The native Ethernet for Modicon is Modbus/TCP and the native Ethernet for Siemens is Profinet - essentially Profibus over Ethernet. I'm not sure they have directly compatible protocols. You may need a communications bridge.
You can use 343-1 communication processor in S7-300 or S7-300's with integrated Ethernet interface and write your own program to communicate via Modbus TCP protocol. I've tested it with some of applications using my own Modbus TCP Master code for S7 PLC's.
Last edited:
Similar Topics
I'm struggling to get an FR-E800SCE to work on CC-Link IE TSN. I'm sure the issue is with the drive, when I plug in the network cable I get no...
I have an issue on my vessel, we have water tight door system created in China, company is no longer operating. We have 7 doors each with their...
Not sure if this is even possible but I have an micro 1400 that I would like to connect to HMI. I am using rs232 from PLC to (RS232/ttl converter)...
Dear all,
what type of built in port does fx2n-80mr plc has? i mean is it rs232, r rs422 or rs485. and which module should i use to convert to...
Hello Guys,
I want to establish profinet communication between siemens plc and my system using python programming. Which python lib can i use to...