You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old November 27th, 2017, 06:40 PM   #1
ian.smith7
Member
United Kingdom

ian.smith7 is offline
 
Join Date: Aug 2002
Posts: 131
Addressing SLC IO from an CLX

Hi All
I am converting an SLC program to run on a CLX platform addressing the SLC IO through an 1747-AENTR.
I have a rung Sending Config Data to 1746-NR4. The Original INT Config Data is now in DINT form But the IO register is still an INT.
I am Tempted to use a MOV instruction to send the DATA From the N7[0]DINT to the 5:O.Channel_0_Config tag created by the Migrator tool.
I think this will convert the Config Data from DINT to INT on the fly. Is that Correct? is there a chance of any excess data bits corrupting adjacent memory locations?
Is there a standard method for this I have not found Yet?
Cheers
Ian
  Reply With Quote
Old November 27th, 2017, 08:51 PM   #2
ian.smith7
Member
United Kingdom

ian.smith7 is offline
 
Join Date: Aug 2002
Posts: 131
After reading another thread I have decided to change the N7 array from Dint to Int
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
OMRON CJ2H DeviceNet and IO addressing pawelleg LIVE PLC Questions And Answers 2 February 4th, 2011 04:04 AM
Data type & Addressing an IO Device Sina R LIVE PLC Questions And Answers 2 October 16th, 2010 09:15 PM
Manual Addressing a SLC from ControlLogix across DH+ TimD LIVE PLC Questions And Answers 23 October 6th, 2010 06:26 PM
CLX to SLC messaging HallerGK LIVE PLC Questions And Answers 22 July 23rd, 2010 09:31 AM
SLC 500 Ethernet Setup JSPLC LIVE PLC Questions And Answers 3 June 1st, 2010 04:15 PM


All times are GMT -5. The time now is 03:04 PM.


.