Upgrading 1747 SLC5/04 Cpu

moataz.elmehy

Member
Join Date
Sep 2018
Location
alexandria
Posts
2
in my Company I have :-
Two CPUs 1747 SLC 5/04
Three CPUs 1747 SLC 5/03
Connected by 1747 PIC converter from RS 232 to Rs 485 to Scada Station Runing RSview V 4.5
the Network have ahigh traffic and low speed
i wanna upgrade keeping the Original Software Rs Logix 500 and Rs linx
what is your advice??
 
Upgrade for what?
You have listed essentially 4 dead, past end of life products.
Just leave what you have as it is until it fails, then replace the systems with current technology.
 

Similar Topics

We are in the process of upgrading a controls system. The existing system is a SLC500 with some IO cards and a 1747-SDN module communicating to a...
Replies
5
Views
476
I have upgraded my SLC 500 from a 5/01 CPU to a 5/03 CPU with and without changing data tables and I/O. However, my 1747-DTAM external module now...
Replies
3
Views
4,029
Hi, I am upgrading a Wonderware SCADA form version 9.5 to version 23. I am able to migrate all the graphic, but when to activate the runtime this...
Replies
8
Views
338
I am looking to upgrade some of our old Servo Drives to the newer kinetix 5700 style. currently we have 4 1394 axis that are all driven by 5kw...
Replies
1
Views
853
Hello, We are currently running a bunch of g310's connected to their SLC5 PLCs through ethernet. I've attempted to upgrade the program from 2.0...
Replies
1
Views
1,069
Back
Top Bottom