Ab plc software

indra

Member
Join Date
Apr 2005
Location
indonesia
Posts
161
Hi,

I have ALLEN BRADLEY PLC type CPU MICROLOGIX 1000 and MICROLOGIX 1200.
Please help me to get the SOFTWARE AB for communication these PLC, I already have the cable communication and I want to buy the SOFTWARE .
Please inform me the TYPE SOFTWARE and the P/N for ordering.
For communication between my notebook and these CPU, I have to buy the AB SOFTAWRE or is possible to get FREE software , just for these MICROLOGIX 1000 and MICROLOGIX 1200.


Regards,

INDRA
 
Hi Mickey,

Thank you for your fast info.
I will buy the software but now I confuse which one I should buy because in the website that you suggested , there are 6 ( six ) types of RSLOGIX 500.
Please help me and chse the best one for make communication with this MICROLOGIX 1200 because I don't have another types of AB PLC, except these two CPU ML1000 & ML1200.

INDRA
 
Hai iam new for this,i have micrologix 1100 plc.and i have Rsmicro
software. but how to use these both and how to communicate the plc and my pc.please help me.
 
I don't have another types of AB PLC, except these two CPU ML1000 & ML1200.

INDRA

Indra initially I would Like to know how many ML1200 you have.??

If the answer is only one, then it could well be cheaper to swap it for a ML1100, as the ML1000, and the ML1100, can be programmed with the free version of RSLogix 500

The ML1100 can handle 80 I/O and uses the same add on I/O that the ML1200 uses.

To Vissu,
You would be better off starting a new post as your issue is different to that of Indra look at the top of the first page for START A NEW THREAD
 

Similar Topics

Hi All, How do I set a password to PLC using Proficy machine software 9.5-9.8 or some other way? I as using Emerson CPE305 CPU. Thanks.
Replies
2
Views
154
Hi everyone id like to start by saying im not a PLC programmer so my technical terminology is limited. i would like advice on what software is...
Replies
4
Views
269
I just graduated as a mechanical engineering student, and started this new job a controls specialist with a company in my area. My coworker has me...
Replies
13
Views
906
I want to buy used/inexpensive (under $500) PLC hardware and software for personal use/testing. Can any of you suggest the best way to go about...
Replies
46
Views
4,647
Hi everyone I am using Winproladder software for programming FATEK FBs PLCs and in programming, we often use Timers for activation of the...
Replies
4
Views
474
Back
Top Bottom