Looking for S120 double motor module

samvivi7

Lifetime Supporting Member
Join Date
Apr 2016
Location
NJ
Posts
50
Hey All,



I am looking for help with configuring s120 double motor modules for the following motors.



SEW motors (X2)

K37DRE80M4/FC/TH/ES7S

1HP GEARMOTOR, 3.98, 1HP, 1" OUTPUT SHAFT SIDE B, M4, CONDUIT BOX 90, CABLE ENTRY 1

Name Plate to read: Voltage 220-242D/380-420Y 50Hz



Also, I am using Sinamics control unit CU320-2 DP if this helps.

Thanks.
 
How far have you gotten?
Automatic configuration yet?

i just realized that i wasn't very clear. what i am looking for is help with selecting a double motor module for that motor.

just need some to point me to a configurator or something.

Thanks
 
Here you go

You didnt mention motor encoders but thats what the smc30's are for ( if TTL/HTL)

bold = quantity


6SL3040-1MA00-0AA0 1 Control Unit CU320-2 DP
6SL3054-0EJ00-1BA0 1 Basic
6SL3060-4AD00-0AA0 1 DRIVE-CLiQ cable; DRIVE-CLiQ cable IP20/IP20 (fixed mounting); 0.16 m


6EP1334-3BA10 1 SITOP modular 10.00 A



Drive system / Supply system
6SL3130-6AE15-0AB1 1 Smart Line Module; 5.00 kW
6SL3120-2TE13-0AD0 1 "Double Motor Module; 3.00 A
for the following axes:
Axis + Axis (1)"

6SL3000-0CE15-0AA0 1 Line choke



Axis / Drive system / Supply system

6SL3162-2MA00-0AC0 1 Connector for power cable

6SL3055-0AA00-5CA2 1 SMC 30

6FX2002-1DC00-1AB0 1 DRIVE-CLiQ cable; DRIVE-CLiQ cable (by the meter) IP20/IP20 (fixed mounting); 1.00 m


Axis (1) / Drive system / Supply system
6SL3162-2MA00-0AC0 1 Connector for power cable
6SL3055-0AA00-5CA2 1 SMC 30

6FX2002-1DC00-1AB0 1 DRIVE-CLiQ cable; DRIVE-CLiQ cable (by the meter) IP20/IP20 (fixed mounting); 1.00 m
 
Last edited:
Here you go

You didnt mention motor encoders but thats what the smc30's are for ( if TTL/HTL)

bold = quantity


6SL3040-1MA00-0AA0 1 Control Unit CU320-2 DP
6SL3054-0EJ00-1BA0 1 Basic
6SL3060-4AD00-0AA0 1 DRIVE-CLiQ cable; DRIVE-CLiQ cable IP20/IP20 (fixed mounting); 0.16 m


6EP1334-3BA10 1 SITOP modular 10.00 A



Drive system / Supply system
6SL3130-6AE15-0AB1 1 Smart Line Module; 5.00 kW
6SL3120-2TE13-0AD0 1 "Double Motor Module; 3.00 A
for the following axes:
Axis + Axis (1)"

6SL3000-0CE15-0AA0 1 Line choke



Axis / Drive system / Supply system

6SL3162-2MA00-0AC0 1 Connector for power cable

6SL3055-0AA00-5CA2 1 SMC 30

6FX2002-1DC00-1AB0 1 DRIVE-CLiQ cable; DRIVE-CLiQ cable (by the meter) IP20/IP20 (fixed mounting); 1.00 m


Axis (1) / Drive system / Supply system
6SL3162-2MA00-0AC0 1 Connector for power cable
6SL3055-0AA00-5CA2 1 SMC 30

6FX2002-1DC00-1AB0 1 DRIVE-CLiQ cable; DRIVE-CLiQ cable (by the meter) IP20/IP20 (fixed mounting); 1.00 m

Hey JRW,

Thank you so much for the help (y)
if it's not too much of trouble can you show me how you configured the module? for the future.

Thanks again
Sam
 

Similar Topics

I downloaded v24 for studio 5000 but can’t find where the download manager put it! Any help? I’ve done it before but can’t remember. Thanks
Replies
7
Views
194
Good Afternoon , We all must of done this before ...... Installing a Frequency Drive in an enclosure , you forget how deep your selector...
Replies
1
Views
103
Problem: Our PLC can only output 4-20mA, but the actuators it needs to control, modulate based on a 0-135Ohm signal. Buying 4 or 8 individual...
Replies
7
Views
218
Good Morning , Not sure how many use Markem-Imaje SmartDate X60 Printers , but I'm having trouble finding a good manual for...
Replies
3
Views
346
Would anyone know what software is needed to program a SAIA PCD1 controller? Or know where to find it online?
Replies
1
Views
116
Back
Top Bottom