Doug W
Member
Greetings,
This is my first post here. I am in an endless installation loop. I am running RSLogix 6.30.00 (CPR 6) and until today RSLinx 2.43 something. I attempted to talk to a Micrologix 1100 today and had no luck connecting. I downloaded an EDS file for Micrologix 1100, still no luck.
I found out from Tech support that I needed to update to a newer version of RSLinx to talk to the 1100. I tried to install RSLinx 2.54 but the installation freezes near the end. A day of searching the Internet has shown many solutions, none of which worked for me.
Attempting to uninstall RSLinx 2.54 in an attempt to get RSLinx Lite installed doesn't work either..
A couple of times either version seems to have installed OK but then RSLinx will not start up. All the other apps that come along with RSLinx work.
I would appreciate any suggestions and hope that no PLC problems come up this weekend at the plant because I can't talk to any PLCs at the moment.
Thanks for your time,
Doug W
This is my first post here. I am in an endless installation loop. I am running RSLogix 6.30.00 (CPR 6) and until today RSLinx 2.43 something. I attempted to talk to a Micrologix 1100 today and had no luck connecting. I downloaded an EDS file for Micrologix 1100, still no luck.
I found out from Tech support that I needed to update to a newer version of RSLinx to talk to the 1100. I tried to install RSLinx 2.54 but the installation freezes near the end. A day of searching the Internet has shown many solutions, none of which worked for me.
Attempting to uninstall RSLinx 2.54 in an attempt to get RSLinx Lite installed doesn't work either..
A couple of times either version seems to have installed OK but then RSLinx will not start up. All the other apps that come along with RSLinx work.
I would appreciate any suggestions and hope that no PLC problems come up this weekend at the plant because I can't talk to any PLCs at the moment.
Thanks for your time,
Doug W