AD Productivity 2000 to Motoman FS100 Ethernet/IP
- Thread starter R_C
- Start date
OkiePC
Lifetime Supporting Member
You should probably start a thread here if you haven't already:
https://forum.automationdirect.com/
That forum doesn't get as much traffic as this one, but there are some A/D gurus that frequent it and I believe A/D tech support checks it periodically too.
https://forum.automationdirect.com/
That forum doesn't get as much traffic as this one, but there are some A/D gurus that frequent it and I believe A/D tech support checks it periodically too.
Similar Topics
We have done our R&D in AD Prod 2000 we are looking at making a change in PLC either got to the DO more series or another vendor.
Does anyone...
So I'm setting up comms for this PLC and HMI. I didn't see a productivity driver in the HMI specifically for productivity under the Koyo section...
I'm working in AD Productivity 2000. I have several identical stations I wish to copy the tags for and just change the station number. Now, there...
I am looking at using this range instead of AB compact logix.
I have had a look at the software manuals and cannot find anything that indicates...
I am looking for a little help on getting my heater to turn on with my Productivity 2000 unit, I am using the P2-08THM card for the T/C and a...