You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old February 24th, 2003, 03:28 AM   #1
gautham
Guest
 
Posts: n/a
AB DH+ connector

I am looking for Allen Bradley DH+ connector (3 pin connector) (1,sh,2) for connecting my PLCs in a network. What is Allen bradley part no. for this 3 pin connector.

I found in one of the connector with the below details:
Make: phoenix contact
Part no.: MSTB2.5
Description: Removable wire connect plug

But when i contacted phoenix contact they said they donot have this part no. anymore.

I need 50 nos. of this connector.

Your suggestion needed

thanks
  Reply With Quote
Old February 24th, 2003, 07:07 AM   #2
Kim Gold
Member
Canada

Kim Gold is offline
 
Kim Gold's Avatar
 
Join Date: Jun 2002
Location: Stoney Creek, Ontario
Posts: 241
I believe this is the part you are looking for:

Mating Connector for remote I/O / DH+:
A-B PN 941999-03 or Phoenix Order No. 1849396

Kim
  Reply With Quote
Old February 24th, 2003, 01:58 PM   #3
shahn4
Member
United States

shahn4 is offline
 
Join Date: Feb 2003
Location: Georgia
Posts: 104
Also the Allen-Bradley part # 22112-046-03 is the connector for DH and remote I/O. You may be able to look at the connector on page 2-13 of this manual.
http://www.ab.com/manuals/eoi/pdf/2711E-821.pdf
Good Luck
  Reply With Quote
Old February 25th, 2003, 12:24 AM   #4
gautham
Guest
 
Posts: n/a
Thanks

Many thanks to Kim Gold and Shahn4 for your kind help
Gautham
  Reply With Quote
Old February 25th, 2003, 03:46 AM   #5
gautham
Guest
 
Posts: n/a
DH+ connector

Dear Mr.Kim gold and Shahn4

I found out part no.: 22112-046-03 in ab website at the mentioned Panelview manual.

I also searched the price for this connector in AB shop-online website and found the price to be USD 14.40. which is quite expensive.

SO i went on to search for the Phoenix contact part no. but the website could not recognise the phoenix order no.(article no.) 1849396

also i could not find AB Part no. 941999-03

Below is what i searched in AB Knowledgebase Doc. ID:9996 "Programmable controller piece parts"

TERMINAL CONNECTORS:
Part no.: 940611-03
3 position 1785-LT, LT2, LT3, LT4, L40B/L, L60B/L 1771-AM1, AM2 remote I/O connector ,1775-S5/SR5

Part no.: 940874-01
Female section of terminal connector 3 pos

But could not find the price for them in AB website.

Can you please let me know the part for phoenix contact 3 position connector for DH+/RIO.

Many thanks again
  Reply With Quote
Old February 25th, 2003, 09:10 PM   #6
Kim Gold
Member
Canada

Kim Gold is offline
 
Kim Gold's Avatar
 
Join Date: Jun 2002
Location: Stoney Creek, Ontario
Posts: 241
You can find the part numbers in the manual for the 1784-PKTX card.
The manual is available at

The Automation Bookstore

Search for item number: 1784-6.5.27
See page 4-5
  Reply With Quote
Old February 25th, 2003, 11:29 PM   #7
Gautham
Guest
 
Posts: n/a
Thanks

Thanks Kim gold. You are correct. I saw those part no. in PKTX manual after reading your post. But could not find this part no. in Phoenix website. www.phoenixcon.com.
Is there any other source from where i can buy this connector for good price.

Many thanks again
  Reply With Quote
Old February 26th, 2003, 06:53 AM   #8
john paley
Member
United States

john paley is offline
 
john paley's Avatar
 
Join Date: Apr 2002
Location: Tennessee
Posts: 304
Look for the Phoenix # at any electronic house that carries Phoenix products--Newark, Allied, etc.
__________________
The Big Cheese
  Reply With Quote
Old February 28th, 2003, 05:12 AM   #9
Kim Gold
Member
Canada

Kim Gold is offline
 
Kim Gold's Avatar
 
Join Date: Jun 2002
Location: Stoney Creek, Ontario
Posts: 241
I guess these connectors must be stocked under a variety of numbers. I just found one, still in the original bag labeled:
Bulletin 2706
Renewal Part RIO CONNECTOR
CAT 46708-605-01
  Reply With Quote
Old February 14th, 2014, 05:43 PM   #10
Dariusincj
Member
United States

Dariusincj is offline
 
Join Date: Jul 2011
Location: Missouri
Posts: 12
Here ya go, better late than never

I'm in the same boat, i have a few SLC 5/04 that are missing the 3 pin DH+ connector on the front of the processor. My local AB distributor says that they are $39 a piece. I found them here for under $3.00
http://www.alliedelec.com/search/pro...x?SKU=70055446
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
AB DH+ connector source Ken Moore LIVE PLC Questions And Answers 7 July 29th, 2004 01:03 PM
AB journey Tim LIVE PLC Questions And Answers 18 December 18th, 2003 06:51 PM
Calling all AB Reps! Help! Vetteboy LIVE PLC Questions And Answers 6 August 30th, 2003 01:03 AM
AB Bashing okiebob LIVE PLC Questions And Answers 6 February 6th, 2003 10:11 PM
AB Software UK Homer LIVE PLC Questions And Answers 1 February 3rd, 2003 01:26 PM


All times are GMT -5. The time now is 04:24 PM.


.