VT510 as HMI for Siemens S7 PLC?

Angel Lopez

Member
A
Join Date
Dec 2002
Location
La Victoria. Edo Aragua
Posts
11
I need to know if anyone has ever tried to use a Video Terminal like the VT510 as a Graphics Operator Panel for a Siemens S7 PLC. Is it possible to do this? If so, How could the graphics displays be created within the S7 PLC? Is there any special Siemens (or third party) software to create such displays? Does a PLC like the S7-226 support the ASCII/ANSI/VT100 Serial Protocol to interface with the VT510? Any ideas will be appreciated.
 

Similar Topics

J
HMI pannel VT510 problem
Dears, i've HMI pannel VT510 ESA connected with a PLC(SYSMAC CQM1 OMRON). a communication problem occured between them and a red led (COM2) is...
Replies
3
Views
2,227
johneedw
J
D
vt510
hello dears i have a video terminal esa 510 . when i start it the alarm led is blinking and the buzzer sound. whek i disconnect the keypad flat...
Replies
0
Views
1,502
dadkhah_mo
D
O
ESA VT510 terminal communication problem
This might be a long shot as this software application is quite old but.... I've got an ESA VT510 terminal that is programmed using MS-DOS based...
2
Replies
19
Views
14,120
pavgre
P
U
SLC500 analog input value data type for EZ Series HMI
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
Replies
3
Views
69
undr_the_table
undr_the_table
U
Data logging in PLC or HMI
Hi, Wy we log data in PLC using DLG instruction, when we have option to log data in HMI
Replies
1
Views
63
JesperMP
JesperMP
Back
Top Bottom