Dear,
I need to take water sample for water quality measurement from a buried pipe, the pipe is buried in the sand, so the contractor will have to open the trench and then include a tapping point on the main line. please advise if this is feasible.
Second option, I can take water samples from downstream an electromagnetic flowmeter located on a flowmeter chamber, however, I am not sure if this sampling will affect the reading of the flowmeter, so to be safe, I guess it is better to keep the sampling line at least 3D downstream the flowmeter.
Please advise which method to you find it more suitable considering that in the first option, the buried pipe will be closer in distance to the water quality analyzer.
thank you, any thoughts on this issue are really appreciated.
Charbel
I need to take water sample for water quality measurement from a buried pipe, the pipe is buried in the sand, so the contractor will have to open the trench and then include a tapping point on the main line. please advise if this is feasible.
Second option, I can take water samples from downstream an electromagnetic flowmeter located on a flowmeter chamber, however, I am not sure if this sampling will affect the reading of the flowmeter, so to be safe, I guess it is better to keep the sampling line at least 3D downstream the flowmeter.
Please advise which method to you find it more suitable considering that in the first option, the buried pipe will be closer in distance to the water quality analyzer.
thank you, any thoughts on this issue are really appreciated.
Charbel