eebads2391
Member
Hi ,
I have a 2 wire prox in a 24v dc circuit feeding the input to a plc
The prox monitors a lever on a conveyor that moves if the contents of the conveyor become choked or compacted
The problem I have is the plc loses its input and stops
I go to the 2 wire prox and the lever is still in position , but the prox is not lit
I move the lever away from the prox and back into position and the prox lights
Can anyone she'd any light on this
Thanks
Mike
I have a 2 wire prox in a 24v dc circuit feeding the input to a plc
The prox monitors a lever on a conveyor that moves if the contents of the conveyor become choked or compacted
The problem I have is the plc loses its input and stops
I go to the 2 wire prox and the lever is still in position , but the prox is not lit
I move the lever away from the prox and back into position and the prox lights
Can anyone she'd any light on this
Thanks
Mike