fasacrifice
Member
Hi All,
I have a question about how to chose the IP address range and subnet mask you use for your industrial network.
I was always choosing 192.168.0.X/255.255.255.0 since I usually have tens of devices in my network.
The problem I am facining is now with E Won remote access devices.
Let's say I'm connected to the internet via a router and the IP of my computer is 192.168.0.X/255.255.255.0 (which most router has by default). I connect to E Won then my indistrial network with the same IP range and get an error saying that IP and subnet conflict. I can solve it either change my computer's network if it's possible or change the IP adress range of the industrial network.
I was just wondering how you guys choose your IP range?
I have a question about how to chose the IP address range and subnet mask you use for your industrial network.
I was always choosing 192.168.0.X/255.255.255.0 since I usually have tens of devices in my network.
The problem I am facining is now with E Won remote access devices.
Let's say I'm connected to the internet via a router and the IP of my computer is 192.168.0.X/255.255.255.0 (which most router has by default). I connect to E Won then my indistrial network with the same IP range and get an error saying that IP and subnet conflict. I can solve it either change my computer's network if it's possible or change the IP adress range of the industrial network.
I was just wondering how you guys choose your IP range?
Last edited: