bulletin blues
Lifetime Supporting Member
About 2 years ago, I upgraded 6 workstations to Rockwell Rev 26.0. This included all the RsLinx, and RsNetworx, and rsView revisions that were required. Everything is working. I'm NOT planning on flashing any firmware at this point. I DO NOT NEED TO UPGRADE at this time.
I do have a tech connect contract.
I would like to be prepared for the next upgrade at our facility.
If I wanted to upgrade to the latest and greatest, should I install every revision, or can I just skip to Rev. 30, and that will install/be compatible with all the older stuff (27-29) as well?
Thanks.
I do have a tech connect contract.
I would like to be prepared for the next upgrade at our facility.
If I wanted to upgrade to the latest and greatest, should I install every revision, or can I just skip to Rev. 30, and that will install/be compatible with all the older stuff (27-29) as well?
Thanks.