Configuring Two SLCs 5/05 in RS View32 via TCP/IP

Hi;


Is it possible to configure two SLC 5/05 in RS View32 via TCP/IP and Direct Driver?


Communication is slow if we configure two PLCs via OPC server.

I don't see why you couldn't set this up in RSLinx enterprise. I'm thinking RSView32 is a very old version of the software, so I'm not sure. It was before my time.

RSView32 support four "direct driver" channels. RSLinx Classic is still the data server, but without the OPC layer.

Can you put a number on what you consider to be "slow" communications ? Is it faster if you have just one SLC-5/05 configured ?