ShaunCroman
Member
Hi
Just wondering if anyone has ever had to read an Schneider PM5100 meter with the Kepware Modbus driver. I am trying to read Modbus registers 3204 - 3207 which should make a 64bit integer with each 16bit integer calculated together (using a Schneider supplied calculation) in order to give me a kWh reading. My results have been somewhat different from what I have expected.
when setting the tag i cant seem to specify 3204 as Kepware puts a 4 infront of it making the register 43204..schneider keep challenging this.
If anyone has ever tried to do this with success I would like to hear about it
Many thanks
Just wondering if anyone has ever had to read an Schneider PM5100 meter with the Kepware Modbus driver. I am trying to read Modbus registers 3204 - 3207 which should make a 64bit integer with each 16bit integer calculated together (using a Schneider supplied calculation) in order to give me a kWh reading. My results have been somewhat different from what I have expected.
when setting the tag i cant seem to specify 3204 as Kepware puts a 4 infront of it making the register 43204..schneider keep challenging this.
If anyone has ever tried to do this with success I would like to hear about it
Many thanks