Hello
I've been trying to create a data log using the s7-1200 1214C CPU with firmware 2.0. I'm using STEP 7 V11 SP2 UPD3, so no compatibility issues.
Here's my program:
The %M176.1 is triggered by me.
%MW177 is the number of days in each month.
%MD205 is the number of the month of each data log that must be created.
In the first network,. all i do is catch the DONE (%M213.0) so i can use it to start the WRITE process.
Also, the WIRTE process is triggered by me (%M176.2).
The ID is the same that in the CREATE - %MD205 -> number of the month.
After that, and when the data log is completed, the log is automaticaly closed (Word = 1).
Also, the ID is again the same.
Was this supposed to work? I can create the Data Log with the CREATE function (I see it via Web Server) but the WRITE function won't work.. It won't write any values or data to the data log.. What's the problem?
Thanks in advance.
I've been trying to create a data log using the s7-1200 1214C CPU with firmware 2.0. I'm using STEP 7 V11 SP2 UPD3, so no compatibility issues.
Here's my program:
The %M176.1 is triggered by me.
%MW177 is the number of days in each month.
%MD205 is the number of the month of each data log that must be created.
In the first network,. all i do is catch the DONE (%M213.0) so i can use it to start the WRITE process.
Also, the WIRTE process is triggered by me (%M176.2).
The ID is the same that in the CREATE - %MD205 -> number of the month.
After that, and when the data log is completed, the log is automaticaly closed (Word = 1).
Also, the ID is again the same.
Was this supposed to work? I can create the Data Log with the CREATE function (I see it via Web Server) but the WRITE function won't work.. It won't write any values or data to the data log.. What's the problem?
Thanks in advance.